Question
How to use the detector library for the DOSE-X?
Answer
This is also part 6 of the training course about DOSE-X.
Automated summary:
The video titled provides a tutorial on how to use the detector library feature in DOSE-X. The video starts by showing the user the list of chambers already present in the library along with their type, serial number, and purchase date. The user can view general information, basic info, dose rate correction factors, and KQ corrections available for each chamber by selecting it from the list.
The video then demonstrates how to add a new detector to the library by selecting the "add detector" option. The user can specify the type of detector, serial number, and purchase date. They can also set the default bias voltage and choose whether to operate the electrometer in grounded or floated mode. The user can enter calibration information, including the next calibration date, calibration interval, and periodic check interval. Notes can also be added for each detector.
Once a new detector is added, the user can edit the corrections for the detector. The calibration factor can be added from the calibration certificate, and the user can choose whether to apply the polarity correction factor or a user correction factor. The user can also define the correction factor for a given dose rate.
Overall, the video provides a comprehensive tutorial on how to use the detector library feature in DOSE-X. It demonstrates how to add a new detector, enter calibration information, and edit correction factors. The video is helpful for anyone who needs to use the detector library feature in DOSE-X.