Question
How to measure in dose mode with the DOSE-X?
Answer
This is also part 13 of the training course about DOSE-X.
Automated summary:
The video provides a brief tutorial on how to measure in dose mode using the DOSE-X software. The video starts with music playing in the background and shows the interface of the DOSE-X software. The narrator explains that the video will demonstrate how to measure in dose mode.
The first step shown in the video is changing the measurement mode from charge to dose. This is done by selecting the dose mode from the drop-down menu. Once the dose mode is selected, the units displayed on the screen change to picocoulombs (pC) and picocoulombs per minute (pC/min).
The narrator then explains that because a calibration factor has been entered in the detector library, the software can directly measure dose by tapping on the start button. The video shows the beam turning on and the dose rate being measured. The measurement stops once the beam is turned off, and the final dose measurement is displayed on the screen.
The video concludes by thanking the viewer for watching and playing music in the background. Overall, the video provides a concise and straightforward tutorial on how to measure in dose mode using the DOSE-X software.