When opening the main opening screen, selecting Profile Library, should display all profiles profiles. Should this not occur, you will need to update the T3 firmware.
To do so,
Download and Prepare Update Files
- Go to Radcal.com.
- Click on Support.
- Under Downloads, click on Accu-Gold Software.
- Under the Accu-Gold T3 Firmware section, download the file:
AGT3_UpdateV3.x.x.zip (Zip download). - Plug a FAT32-formatted flash drive into your computer (Note: NTFS is not supported).
- Navigate to your Downloads folder.
- Double-click on AGT3_UpdateV3.x.x.zip to open it in Windows File Explorer.
- Press Ctrl + A to select all files and folders inside the ZIP.
- Right-click and choose Copy.
- Open the folder for your flash drive.
- Right-click and choose Paste to copy all files/folders to the flash drive.
Perform the T3 Firmware Update
- Ensure the T3 battery is at medium charge or higher.
- Charge it if necessary before proceeding.
- Turn on the T3 and wait until it reaches the main menu or initial measurement screen.
- Plug the flash drive into the T3.
- The update program will run automatically.
- Do not unplug the flash drive during the update.
- When the update completes, the display will show:
- “Update finished...”
- “Press Enter to Exit…”
- Press Enter, then:
- Switch off the T3.
- Remove the flash drive.
- Turn the T3 back on to launch the updated firmware.