Question
How to setup SDP display for PC connection.
Answer
In order to setup the SDP display for PC connection you need to follow these steps:
Step 1
Disconnect the display from power supply.
Step 2
Press all three buttons on the display and connect the device.
IMPORTANT: Hold down all three buttons until you read "DEVICE ID" on the display.
Step 3
Press the reset button 1 time now. You will now see the setting "SERIAL".
Step 4
If the display does not show "PC" press the RESET so often until the display shows "PC".
Step 5
To exit the setup press the RESET button 4 times. The display then shows 0.0 (0.00) again.