I forgot to apply LUT before myQA Patient measurement, can I do it after measurement as well?

Question

I forgot to apply LUT before myQA Patient measurement, can I do it after measurement as well?

Answer

Yes, it is possible to apply LUT after myQA Patient measurement, please follow below steps:

Step 1

Select the frame and right-click - Apply gantry angle correction...

​

Step 2

Select the LUT, and click OK.

​

Step 3

The LUT is applied to the frame.

​

Please note that the "Apply gantry angle correction" button is only active when the measurement was done with a Gantry Angle sensor and LUT was not applied yet.