Question
The beam model is validated and we want to use it clinically. How to commission a Compass beam model?
Answer
In order to commission a Compass beam model, please follow below steps:
Step 1
Run Beam Commissioning software
The login is the same as Compass.
Step 2
Click Beam Commissioning
Step 3
Under Uncommissioned machines, select your beam model.
Step 4
Click the small arrow on the left, check each beam under your machine one by one.
Make sure all curves (depth dose and profiles) are computed. If not, please click Enter edit mode - compute all curves. After computation, click Save button and click Exit edit mode.
Step 5
Right-click on the beam model - Commission...
Step 6
Please review all the beam model specifications and parameters page by page. On the last page, click Finish to confirm the commission.
Then you can find your beam model in the Commissioned machines list.