Question
How do I set the KermaX-plus IDP interface for the PC?
Answer
To set the KermaX-plus IDP (120-104 HS) interface for the PC, you must carry out the following steps:
Step 1
Connect the KermaX-plus to the power supply.
Step 2
Briefly press the left button and press both buttons simultaneously as soon as you release them.
The menu appears on the display.
Step 3
Press the left button until you see the “SERIAL” setting.
Step 4
If the display does not show “PC”, press the right button repeatedly until the display shows “PC”.
Step 5
To end the setup, press the RESET button until the display shows 0.00 again.