Question
How to reset the camera of the Lynx device?
Answer
Please follow below steps to reset the Lynx memory:
Step 1
Right-click on the Lynx2D icon - Properties
Step 2
Type –fcm into the path as shown below:
Step 3
Press Apply and OK to confirm the change.
Step 4
Restart the Lynx2D software now with the Lynx connected. A pop-up message will appear stating that the camera was set back.
Step 5
Once you have read the message close the Lynx2D software again and remove the -fcm you put in step 1 and 2.
Step 6
After you have removed the -fcm you can open the software again and start acquiring images.